Asphalt Paving: How Long Does Asphalt Take to Dry

The asphalt drying time is an important factor when planning any asphalt driveway, roadway, or parking lot project.

Several elements, such as the weather and thickness of asphalt, will determine how long it takes for the asphalt surface to dry. Asphalt takes approximately anywhere from six to twelve hours to dry completely.

Your asphalt driveway will be dry and ready to use with a little perseverance. However, it’s always wise to err on the side of caution and give your asphalt plenty of time to dry fully before driving or walking on it. If you are in a hurry, there are a few tips that you can follow to help speed up the drying process.

What Affects the New Asphalt Driveway’s Drying Time

Weather and Temperature

The weather impacts how long it takes for your asphalt to dry. The weather hugely affects the length of time it takes for asphalt to dry. Laying asphalt on a hot day will dry much faster than working on a cooler day. Drying time is affected by both the pavement temperature and the air. Asphalt takes six to eight hours to dry on a hot day. If you’re working on a chilly day, your asphalt might take up to twelve hours to dry completely.

Asphalt Paving Thickness

Another significant factor is determining how long it takes for asphalt to dry its thickness. A thicker layer of asphalt will take longer to dry than a thinner layer. If you’re working with a particularly thick layer of asphalt, you might want to give it an extra day or two to fully cure. However, if you are working with a thin layer, it may only take six to eight hours to dry.

Can I Speed Up the Asphalt Drying Time

If you want your asphalt to dry more quickly, you can do a few things to speed up the curing process. 

Choosing a heat lamp with a low heat setting is one of the most efficient methods to speed up the drying process. If you have access to an infrared heater, it can also be utilized to accelerate the drying time. Fans may assist in air circulation and induce evaporation by blowing air around.

Applying a sealer is one of the best ways to speed up the drying process on your asphalt surface. A sealer will help form a barrier on the asphalt surface, preventing moisture from seeping in and delaying the drying process. 

You may use a sealer or hire Denali Asphalt, an asphalt paving professional, to do it for you.

Asphalt Curing Process – Why Is It Important to Wait

Asphalt is a durable and long-lasting material, but it needs time to cure properly. You risk damaging the material if you drive or walk on asphalt before it’s completely dry.

Waiting for asphalt to dry may seem like a pain, but it’s worth it in the long run. By taking the time to let your asphalt dry completely, you’ll ensure that it has the longest lifespan possible.

Asphalt needs to dry to fully cure. When asphalt is laid down, it is in a malleable state that is easily damaged. If you step on new asphalt before it dries, you will leave permanent tracks or footprints. Asphalt has to dry and harden to become strong enough to support the weight of vehicles. If you attempt to drive on wet asphalt, you risk damaging the surface and causing cracks and potholes.

By being patient, you will be able to use your asphalt sooner than expected. If you properly take care of it, you will be able to use it in no time.

Proper Care for Newly Paved Asphalt Surface

Proper care of newly paved asphalt is essential to ensure a long lifespan. You can try these tips below:

1. Give your new asphalt at least 24 hours to cure and harden by refraining from driving or parking on it.

2. For the first week after your new asphalt is put in, avoid using harsh chemicals or cleaners. The chemicals in these products can break down asphalt surfaces and cause them to degrade prematurely.

3. If you must drive or park on your new asphalt within 24 hours after it has been laid, be careful not to speed or place too much strain on it. Avoid sudden stops and starts, and do not make sharp turns.

4. Once your new asphalt surface has had time to cure and harden, you can begin using it as you normally would. Please avoid any racing or doughnut patterns that could potentially damage the surface.

Following these simple tips can help your new asphalt last for many years.

If you are looking forward to paving your home or business, we have the skills and the equipment to do the job. Our team of experienced paving contractors can help you with your pavement needs. Call Denali Asphalt immediately to work on your next Santa Rosa, CA project!